Aluminium Alloy 6201/6202/T4/ Rod(Sizes - 6.5/7.6/9.5/12.6mm) |
Aluminum rod for electrical purposes meets or exceed the following ASTM specifications:
B211-Aluminum and Aluminum Alloy Bar, Rod and Wire
B398-Aluminum Alloy 6201 Drawing Stock.
B531-Aluminum Alloy 5005 Drawing Stock.
B800-Standard Specification for 8000 Series.
We manufacture aluminium rod according to all international standards
(BS, DIN, IEC, NFC etc) upon request.
The following are the principal products being marketed:
6101-Rod with a conductivity of 50.5% up to 53% IACS, and from 160 N/mm2 Up to 220 N/mm2.
KJV's continuous casting line also features continuous heat-treated 6101 rod.
6201-Rod with a conductivity of 50.5% up to 52.0% IACS, and from 170 N/mm2 Up to 230 N/mm2.
8017-Rod with a minimum conductivity of 58.5% up to 60.8% IACS, and from 115 N/mm2 to 140 N/mm2.
Wire Rod Alloy - Mechanical Aluminum Alloy Rod
Aluminum rod for mechanical purposes meets or exceeds the following ASTM specifications:
3003 B-211 Aluminum and Aluminum Alloy Bar, Rod and Wire
5052 B-211 Aluminum and Aluminum Alloy Bar, Rod and Wire
B-316 Aluminum and Aluminum Alloy Rivet and Cold Heading Wire and Rods
5056 B-211 Aluminum and Aluminum Alloy Bar, Rod and Wire
5154 B-211 Aluminum and Aluminum Alloy Bar, Rod and Wire
6061 B-221 Aluminum and Aluminum Alloy Extruded Bars, Rods, Wire, Shapes and Tubes
6063 B-221 Aluminum and Aluminum Alloy Extruded Bars, Rods, Wire, Shapes and Tubes
General Information
In the pursuit of correct steel chemistry, temperature and the maximum removal of sulphur, phosphorus and dissolved gases, the single most important step is the deoxidation of steel.
Advantages Of Rod
Ease of addition
Rapid rate of reaction
Low cost
Strong affinity for oxygen
Grain refinement properties
